F3000

Freshfilter controller F3000 series

The F3000 is fully digital, works quickly and has a modern appearance, meaning that it fits perfectly into all current cabin equipment inserts.

F3000_Signaling_Freshfilter
F3000_Detail_1_Freshfilter

A maximum of three different types of filters can be recognized and displayed on the control panel. The cabin pressure and any alarms are also displayed at all times on the F3000. With four vandal-resist-ant buttons, the F3000 can be operated according to the operator’s needs.

F3000_Detail_2_Freshfilter

The hydrocarbon sensor is optional. The HC value can be displayed on the LED screen. An alarm sounds if the value exceeds five PPM (even if the HC is not displayed on the screen). This HC module can also be retrofitted to the F3000 by the people of Freshfilter.

F3000_Detail_3_Freshfilter

The Freshfilter wiring harness offers you the ultimate preparation. All cab air filtration systems and controllers are supplied with a single connection, meaning that everything is interchangeable. Upon re-quest, Freshfilter can also set up the F3000 to operate on machines from other manufacturers.

Sie haben eine direkte Frage oder möchten uns zu diesem Produkt kontaktieren? Mailen oder rufen Sie unseren Spezialisten direkt an:

F3000

automatically and safe

In automatic mode, the controls ensure that the overpressure in the cabin is at least 100 Pa. If there is too much or too little pressure on the cabin, a visual and acoustic alarm is triggered so that the operator is immediately alerted to the possible danger.

Technical specifications

More info about Freshfilter's F3000

Technical data F3000
Height
198mm
Width
98mm
Weight
600 gram
Voltage
12 and 24V
Systems
F20 / F33 / F33R / F40 / F40R / F50
Gas sensoring
HC or H2S (both optional)
Meets requirements of 
ISO23875 / NEN4444 / CROW400 / INRS
Signalling
Acoustical / Optical (optional green light)
Connection
Deutsch and Serial, to minimize cables in- and outside cabine
F3000_04_Product_FreshFilter
F3000_03_Product_FreshFilter
OBEN